【Features】:
1. Two layers above and below (the PET film and the lower layer of paper are easy to tear) – making it easier, simpler and more straightforward when first uncovered.
2, the position of the sticking around is wider, so that the sticking is more resistant and more firm - not easy to loose.
3, imported pressure sensitive adhesive sensitization rate is low, but does not rule out individual allergies skin allergies.

【Instructions】:
Step 1: Apply the medicine to the middle of the film.
Step 2: After sticking to the skin, tear off the outermost PET film and leave a very thin and very soft PU film on the skin. (Be sure to tear off the PET film on the surface, which is the hard surface film) (the product has three layers, only the middle layer is retained).

【Product Name】Medical Sterile Applicants
【Specification Model】10cm×10cm
【Structural composition】 The product mainly consists of three parts: backing, absorbing pad and release layer. The backing material of the B-type patch is polyurethane (PU) film and is coated with medical hot melt adhesive. The absorbent pad material is a needle-punched polypropylene spunbond nonwoven fabric, and the release layer is an anti-stick paper. The product is sterilized with ethylene oxide and is provided in sterile form for single use.
【Main Performance】
1. Sticky: The top of the sticker applied on the stainless steel plate should not slide more than 2.5mm
2. Peel strength: The average force required for every 1cm width of the patch should not be less than 1.0N
3. Water resistance: Type B patch has waterproof function and should withstand 500mm hydrostatic pressure for 300s
4. Comfort: The stretchability of B-type patches is not greater than 2N/cm; permanent deformation is not greater than 5%
5. Liquid absorption: The liquid absorption amount per 100cm² absorption pad should not be less than 8g
6. The dissolution in water is not greater than 0.7%
7. PH: pH is 5~8
8. The total content of heavy metals should not be greater than 10μg/g
9. The product is sterilized by ethylene oxide, and the residual amount of ethylene oxide shall not exceed 10μg/g;
10. The product is sterile applicator.
【Scope of application】Used for superficial wound care, providing a microenvironment for wound healing.
【How to use】 Please clean and disinfect the wound before using this product; 2) This product has been sterilized, and you can use it after opening a small package.
【Contraindications】 Use with caution if you are allergic to polyurethane (PU) membranes and medical hot melt adhesives.
【Precautions】

1. Please check whether the packaging is intact before use, and confirm the outer packaging logo, production date, and validity period, and use it within the sterilization period;
2. Due to the limitation of product material, the B-type patch has no water vapor permeability and is not elastic.
3. This product is a sterile product and is used once and is strictly prohibited for repeated use;
4. This product has been sterilized with ethylene oxide. If the packaging is found to be damaged before use, it is prohibited to use it;
5. To keep the wound dry, it is recommended to replace it frequently;
6. After use, it should be handled according to the requirements of the hospital and environmental protection department;
7. The product should be used as soon as possible after it is opened;
8. Observe signs of wound infection. If any of the following signs are found, please consult a professional medical staff: fever, increased pain, redness, swelling, abnormal gas
odor or exudate. When using this product to treat infected wounds, it must be operated under the guidance of professional medical staff.
9. Do not use this product with an oxidant such as hydrogen peroxide or hypoglyceride solution. These solutions may affect the structure and performance of the dressing.
10. When changing the dressing, if the dressing is bonded to the wound surface, you can use ordinary normal saline to soak it and then gently remove it.
11. If the wound does not show signs of healing or any adverse symptoms occur, please consult a professional medical staff.

【Storage】 It is recommended to store it in a ventilated, dry, non-corrosive gas environment, away from fire sources and flammable materials.

【Package includes】: 20pcs/box Wound waterproof patch

Notes：
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. 
2. Please allow slight measuring deviation due to manual measurement.